JS-DHW60A Infrared multi-element Rapid analyzer, also known as Infrared Multielement analyzer, Multielement analyzer, Element analyzer, metal full-element analyzer
Main technical parameters:
1, Carbon-sulfur using Infrared analysis; other Element photoelectric colorimetric measuring range: Carbon: 0.005-10.0000% (can increase to 99.999%) Sulfur: 0.0005-0.3500% (can increase to 99.999%).
2, the analysis time: about 35 seconds (excluding sampling, said sampling time)
3, analytical error: Carbon is better than GB / T223.69-2008 sulfur is better than GB / T223.68-1997
4, Electronic balance: weighing range 0-100g Shanghai Ryohei 0.0001g accuracy of reading
5, computer: Tsinghua Tongfang 19-inch LCDs
6, Power supply: AC220V 50Hz
Main feature:
1, Windows Chinese user interface, Windows operating systems have a flexible, full-featured, easy to operate, easy to master.
2, dynamic display during the analysis of the data and the Carbon-sulfur release profile.
3, imports of electronic balance online operation, not quantitative, said sample.
4, the whole based on integrated control and data acquisition PCI bus, high stability, fast response and good reliability.
5, uses a low-noise, high sensitivity, high stability, anti-interference of Infrared detector.
6, new software, fully functional, with channel selection, data breakpoints, coefficient correction curve was complex, parameter management, switch diagnostics, blank correction and other features.
7. Element analysis Carbon-sulfur two have 16 channels, a total of 32 channels, can be any combination, a wide range of options.
8, non-contact High frequency high voltage spark Electric arc ignition, simple structure, easy to maintain. 9, low materials, energy saving, accurate, cost, cheap, cost-effective.
Main technical parameters
1, photoelectric colorimetric assay;
2, Range: absorbance value 0-1.99A concentration 0-99.99%; Si: 0.010 ~ 18.000% Mn: 0.010 ~ 20.50% P: 0.0005 ~ 2.000% Ni: 0.010 ~ 48.00% Cr: 0.01 ~ 38.000% Mo: 0.010 ~ 7.000% Ti: 0.010 ~ 5.000%; Nb: 0.010 ~ 0.50%; Cu: 0.010 ~ 8.000% ΣRE: 0.010 ~ 0.500% Mg: 0.010 ~ 0.800%
3, the measurement accuracy: in line with standard GB223.3-5-88
4, can be measured Element: manganese, phosphorus, silicon, nickel, molybdenum, chromium, titanium, copper, lead, zinc, iron, aluminum, magnesium, rare earths, niobium, vanadium Element Analysis of the main features:
◆ The instrument is the latest development of a domestic advanced Multielement analyzer, combined with the company's research and development of "a new Non-ferrous metal wet method", mainly of Aluminum Alloy or Copper Alloy, ores and other materials in the Si, Mn , P, Cr, Ni, Mo, Cu, Ti, Mg, Sn, Zn, Pb, and other Element. can detect carbon steel and Alloy steel, high Alloy steel, Stainless steel, raw Cast iron, ductile iron, Alloy Cast iron and other materials in a variety of Element;
◆ brand computer microcomputer control, the entire Chinese menu, desktop printer to print the results
◆ Each instrument has four major channels, each channel can store 30 curve, each curve can detect one Element content, in principle, a total of 120 kinds of detection of Alloy Element.