JS - TG5 Stokehole Liquid iron Silicon - carbon analyzer is also called the Stokehole Silicon - carbon analyzer, Stokehole analyzer, Stokehole Liquid iron analyzer, hereinafter referred to as Casting test instrument. It is widely used in field measurement of grey iron, iron, ductile iron and vermicular iron, such as the original Liquid iron in: carbon equivalent, carbon and Silicon content, pouring temperature TM, TL the liquidus temperature, solidus temperature TS. Direct printing results.
Product features:
Measurement results 1, Digital display direct reading, measuring time for 2-3 minutes, is advantageous for the casting engineer ingredients at the scene.
2, the instrument of simple operation, free maintenance, general furnace work can be used on site.
3. The instrument is portable, can be free to move on the mantelpiece, furnace can be used at the same time, a new instrument.
4. The instrument can measure the ball ball of Liquid iron, it is domestic instruments cannot. This technology filled the domestic blank.
Important metallurgical parameters. 5. The instrument can Automatic control of grey Cast iron solidification Automatic measurement, revoke the manual operation, can external output device connected to the signal and measurement data (big type remote displays, lights, computer, printer).
Three, the Technical parameters:
Measuring parameters: the determination of C, Si, CEL, delta T, delta TM, calculating tensile strength of the Rm, hardness HB, quality coefficient R/H, and total number of cluster MEG, graphitization factor K
Measuring range: according to ICEC584, ModelK (Nicr - Ni) 200 ℃ to 1370 ℃ C 2.1-4.2 0.9 5.0 2.5 5.0 precision CEL Si: < + ℃ CEL plus or minus 0.047% C + / - 0.039% Si + / - 0.1%
Display: four LED display number 500 mm resolution: 1 ℃
Operation mode: 9 key choice required parameters including "Auto" button cycle shows C, Si, CEL by rotating potentiometer adjusting the Si content by rotating potentiometer adjusting C content
Working power supply: AC, 220 v + 10% for 50 hz power: 10 va - 35 va ambient temperature: 0 ℃ to 50 ℃
Printing parameters: HB, RM, PEAK, TL, CEL, SC, TS, C %, % Si