Uses:JS-TG5 Stokehole Rapid Silicon-carbon analyzer, also known as Stokehole Liquid iron composition analyzer, are widely used in field measurements of gray iron, Ma iron, ductile iron, iron and other raw Liquid iron creep in: carbon equivalent, carbon content, silicon content, water samples temperature TM, the liquidus temperature TL, solidus temperature TS. The results direct printing.
Product features:
1, measurements Digital display for direct reading, measurement time of 2-3 minutes, to facilitate casting engineers on-site batching.
2, simple instrument operation, maintenance, general furnace workers to the field.
3. Instrument is portable and can move freely in the mantelpiece, multiple furnaces can be used simultaneously with a single instrument.
4. Liquid iron instrument measures the iron ball after ball, which is the instrument can not be done. The technology to fill the gap.
5. Automatic control can be an important instrument of metallurgical parameters. It solidified gray Cast iron Automatic measurements, eliminating the need for manual operation. You can connect an external signal and measurement data output device (large type remote displays, lights, computers, printers).
Three, Technical parameters:
Measurement parameters: Determination of C, Si, CEL, △ T, △ TM, calculate the tensile strength Rm, hardness HB, quality factor R / H, total number clumping MEG, graphite factor K
Measuring range: according to ICEC584, ModelK (Nicr-Ni) 200 ℃ -1370 ℃ C 2.1-4.2 Si 0.9-5.0
CEL 2.5-5.0
Accuracy: <± ℃ CEL ± 0.047% C ± 0.039% Si ± 0.1%
Display: 4 digit LED display 500mm Resolution: 1 ℃
Operation: 9 keys to select the desired parameters in which "Auto" button to cycle through C, Si, CEL
Si content adjusted by turning the potentiometer
Adjusted by rotating the potentiometer C content
Power supply: AC: 220V ± 10% 50HZ Power: 10VA-35VA Ambient temperature: 0 ℃ -50 ℃
Print parameters: HB, RM, PEAK, TL, CEL, SC, TS, C%, Si%