Uses:

JS - before furnace TG5 rapid Silicon - carbon analyzer is also called before furnace hot metal composition analyzer, also known as Silicon - carbon analyzer, Stokehole analyzer, it is widely used in field measurement of grey iron, iron, ductile iron and vermicular iron, such as the original molten iron, carbon equivalent, carbon and Silicon content, pouring temperature TM, TL the liquidus temperature, solidus temperature TS. Direct printing results.

Product features:

1, measuring result display direct reading, measuring time for 2-3 minutes, is advantageous for the casting engineer ingredients at the scene.
2, the instrument of simple operation, free maintenance, general furnace work can be used on site.

3. The instrument is portable, can be free to move on the mantelpiece, furnace can be used at the same time, a new instrument.

4. The instrument can measure the ball after the ball of hot metal, it is domestic instruments cannot. This technology filled the domestic blank.

Important metallurgical parameters. 5. The instrument can automatically control the properties of gray cast iron solidification automatic measurement, revoke the manual operation, can external output device connected to the signal and measurement data (big type remote displays, lights, computer, printer).

Three, the technical parameters:

Measuring parameters: the determination of C, Si, CEL, delta T, delta TM, calculating tensile strength of the Rm, hardness HB, quality coefficient R/H, and total number of cluster MEG, graphitization factor K

Measuring range: according to ICEC584, type number K (Nicr - Ni) 200 ℃ to 1370 ℃ Si 0-2.1-2.1 C 20 CEL, 2.5 to 5.0

Accuracy: < + ℃ CEL plus or minus 0.047% C + / - 0.039% Si + / - 0.1%

Display: four LED display number 500 mm resolution: 1 ℃

Operation mode: the nine keys to choose the required parameters including "Auto" button cycle according to C, Si, CEL

Through rotary potentiometer adjustment Si content

Through rotary potentiometer adjustment C content

Working power supply: AC, 220 v + 10% for 50 hz power: 10 va - 35 va ambient temperature: 0 ℃ to 50 ℃

Printing parameters: HB, RM, PEAK, TL, CEL, SC, TS, C %, % Si